Corrugated plastic or corriboard – commonly known under the tradenames of Polyflute, Coroplast, FlutePlast, IntePro, Proplex, Correx, Twinplast, Corriflute or Corflute – identifies a wide range of extruded twinwall plastic-sheet products made out of high-impact polypropylene resin with a similar make-up to corrugated fiberboard. It is a light-weight tough material which can easily be cut with a utility knife. Manufacturers typically offer numerous colors and thicknesses (quite commonly 3, 4, 5 mm).
Corrugated plastic made from polycarbonate may also be known as Twinwall plastic.
Chemically, the sheet is inert, using a neutral pH factor. At regular temperatures most oils, solvents and water have no effect, allowing it to perform under adverse climatic conditions or as a product component subjected to harsh chemicals. Standard sheets could be modified with additives, that are melt-blended in to the sheet to satisfy specific needs in the end-user. Special products which require additives include: ultra-violet protection, anti-static, flame retardant, custom colors, corrosive inhibitors, static-dissipative, amongst others.
This product is often employed to erect commercial, political or other kinds of signs as well as for constructing plastic containers and reusable packaging. It is popular inside the signwriting industry for making signs for real estate property sales, construction sites and promotions.
The last decade has found its increasing use among guinea pig, rabbit, domesticated hedgehog and other small pet enthusiasts as components of DIY cages. Additionally, it is actually used by individuals the remote-controlled aircraft community to construct nearly indestructible SPAD model aircraft.
Usage of corrugated plastic in welded hollow plastic plate air-to-air heat exchangers.
At least one manufacturer[who?] of air-to-air heat exchangers (used in heat recovery ventilation) works with a fused stack of sheets with this material alternating with spacers made the exact same material as kkdcmv heat-exchange medium. One air stream passes through the corrugated channels in the interior from the sheets, while the other passes involving the exterior layers of the stacked sheets.
Correx is actually a tough, durable and impact resistant protection board, available in a variety of different choices to match specific project requirements. The twin-walled polypropylene construction from the Correx makes them appropriate for both internal and external applications where these are frequently used to protect floors, walls, doors, ceilings and windows in addition to use as being a permanent formwork system for concrete construction.
Searching for something a bit more rigid than flexible plastic sheeting? Here you decide to go…CORREX! Correx is regarded as the versitile product to use for a multitude of applications. Correx is a very lightweight, yet strong and durable. It is made with a twin wall polypropylene sheet material. It is often referred to as corrigated. It really is non-toxic, chemically inert, and can be printed on. It can be used for surface protection, or made into boxes, trays, dividers a great deal more. It is often employed to protect hard hardwood flooring from heavy equipment passing over it. Some people liken it to plastic cardboard! It could be produced in 2mm and thicker.
Correx is quite easy to work with. Because it is so lightweight and simple to deal with, consumers often work with scissors or a knife to match their requirements. It is actually both water and chemical resistant! It can be fire retardant, and can be made anti-static with U.V. stabilizers to prolong its life when out doors.